Laptop Charging Port Repair Experts
Laptop not charging? Have to wiggle the wire to get power? We professionally solder new DC power jacks directly to your motherboard for a permanent fix.
Fix Your Power Connection
A broken charging port is one of the most annoying laptop issues. It usually starts with needing to wiggle the charger, but eventually, it stops working altogether.
Attempting to force it can cause sparks or permanently damage your motherboard. At Leeds Laptop Repair, we don't just glue it back in; we de-solder the old broken port and professionally solder a brand new, reinforced jack for a solid electrical connection.
We fix charging ports for: HP, Dell, Lenovo, Acer, Asus, MSI, and Toshiba. We also repair modern USB-C charging ports found on newer high-end laptops.
Common Charging Issues
Identify the symptoms of a faulty DC Jack.
Loose Connection
You have to hold the charger at a specific angle or weigh it down with a book to get it to charge. This indicates the internal pin has snapped or loose solder joints.
Not Charging at All
The laptop is plugged in, but the battery light doesn't come on, and it won't power up. The jack may be completely detached inside the case.
Sparking / Burning
If you see sparks when plugging in or smell burning plastic, STOP using it immediately. This is a fire hazard and can short out your motherboard.
Physical Damage
The plastic centre pin is missing, or the port has been pushed back inside the laptop casing due to a drop or trip over the cable.
USB-C Charging Repair
Modern laptops use USB-C for power. These ports are tiny and complex. We have specialized micro-soldering equipment to replace damaged USB-C ports.
Hinge-Area Damage
On some laptops, the charging port is near the hinge. Broken hinges can crush the charging cable. We repair both the hinge and the port simultaneously.
Why Professional Soldering Matters
Many cheap repair shops attempt to "reflow" the existing solder or simply glue the jack in place. This is a temporary fix that will fail again within weeks.
Our Process
- De-soldering: We safely remove the old lead-free solder using hot air rework stations.
- Board Cleaning: We clean the contact pads to ensure a perfect connection.
- New Part: We install a brand new, high-quality DC jack (not a cheap copy).
- Reinforcement: We use high-grade solder and epoxy reinforcement (where necessary) to make the new port stronger than the original.
Charging Port FAQ
Common questions about DC jack repairs.
How much does it cost?
Standard DC jack replacements typically cost between £60 and £80. USB-C ports or those requiring extensive motherboard work may cost slightly more. We provide a fixed quote before starting.
How long does it take?
We can often complete this repair the same day if you drop it off in the morning. Since it involves soldering and testing, we usually ask for 2-4 hours to ensure it's solid.
Can you fix USB-C charging ports?
Yes. USB-C ports require micro-soldering under a microscope. Our technicians are trained and equipped to handle these delicate repairs for Dell XPS, HP Spectre, and MacBooks.
Do I need to bring my charger?
Yes, please! Sometimes the fault is actually with the charger plug itself, not the laptop. Bringing your charger allows us to test both and rule out a faulty adapter.